大型航空模型的金屬部件長期暴露在空氣、濕度變化等環境中，極易因氧化而生銹，不僅影響外觀質感，還可能削弱結構強度，甚至干擾模型的整體性能。想要有效預防金屬銹蝕，需從材料處理、防護涂層、環境控制及日常維護等方面綜合施策，構建全方位的防銹體系。

　　The metal components of large aviation models are exposed to air and humidity changes for a long time, which can easily rust due to oxidation. This not only affects the appearance and texture, but may also weaken the structural strength and even interfere with the overall performance of the model. To effectively prevent metal corrosion, comprehensive measures need to be taken from material handling, protective coatings, environmental control, and daily maintenance to build a comprehensive rust prevention system.

　　在材料選用與前期處理環節，優先選擇本身具有一定抗銹能力的金屬材料是基礎。比如航空級鋁合金，其表面能自然形成一層致密的氧化膜，像一層無形的防護盾，可阻擋水汽和空氣的侵蝕；不銹鋼材質則憑借自身含有的特殊合金成分，在潮濕環境中也能保持較好的穩定性。對于這些金屬材料，加工前的清潔處理同樣關鍵。先用酒精或丙酮擦拭表面，去除油污和雜質，再用細砂紙輕輕打磨，讓金屬表面變得粗糙些，這樣后續的防護涂層就能更好地附著。若是鋼鐵類部件，還可進行磷化處理，形成一層保護膜，為防銹打下扎實基礎。

　　In the process of material selection and pre-processing, priority should be given to selecting metal materials that have a certain degree of rust resistance. For example, aviation grade aluminum alloy can naturally form a dense oxide film on its surface, like an invisible protective shield, which can block the erosion of water vapor and air; Stainless steel material, with its special alloy composition, can maintain good stability even in humid environments. For these metal materials, cleaning before processing is equally crucial. First, wipe the surface with alcohol or acetone to remove oil stains and impurities, then gently polish with fine sandpaper to make the metal surface rougher, so that the subsequent protective coating can adhere better. If it is a steel component, phosphating treatment can also be carried out to form a protective film, laying a solid foundation for rust prevention.

　　構建多層防護涂層是防止銹蝕的核心手段。先涂一層防銹底漆，比如環氧樹脂底漆，對于鋼鐵部件來說，它能像 “衛士” 一樣隔絕外界侵蝕，其中的特殊成分還能主動抵御氧化；鋁合金部件則適合用丙烯酸底漆，可填充金屬表面的微小孔洞，進一步阻斷銹蝕路徑。底漆干透后，再涂上面漆，比如聚氨酯面漆，它耐紫外線能力強，適合經常暴露在戶外的模型；丙烯酸面漆干燥快、硬度高，適合復雜的曲面部件。涂刷時要注意均勻，避免漏涂，尤其是邊角、焊縫這些容易積水的地方，更要仔細處理。對于活動部件，如連接鉸鏈、舵機連桿等，除了涂層保護，還可以涂抹一層薄薄的防銹油或潤滑脂，形成油膜阻擋濕氣；螺紋接口處纏繞生料帶，防止水汽滲入縫隙。

　　Building multi-layer protective coatings is the core means of preventing corrosion. First, apply a layer of anti rust primer, such as epoxy resin primer. For steel components, it can act as a "guardian" to isolate external corrosion, and its special components can actively resist oxidation; Aluminum alloy components are suitable for acrylic primer, which can fill the tiny holes on the metal surface and further block the corrosion path. After the primer is dry, apply the topcoat, such as polyurethane topcoat, which has strong UV resistance and is suitable for models that are frequently exposed outdoors; Acrylic topcoat dries quickly and has high hardness, making it suitable for complex curved parts. When painting, attention should be paid to uniformity to avoid omissions, especially in areas such as corners and welds that are prone to water accumulation, which require careful handling. For moving parts such as connecting hinges, servo links, etc., in addition to coating protection, a thin layer of rust proof oil or grease can also be applied to form an oil film to block moisture; Wrap raw material tape around the threaded interface to prevent water vapor from seeping into the gaps.

　　環境控制和日常維護對防銹同樣重要。制作模型時，要保持工作環境干燥，濕度控制在 40%-60% 之間，可借助除濕機或加濕器調節。加工過程中，金屬部件表面若沾上汗液、油漬，要及時用干燥的軟布擦干凈，因為這些物質中的鹽分可能加速銹蝕。模型存放時，要選通風好、沒有酸堿污染的地方，在周圍放些干燥劑，定期更換。大型模型的內部封閉空間，如機翼內腔，可懸掛防銹袋，其釋放的特殊氣體能形成隱形保護層。平時每隔 3-6 個月要檢查一次，用軟毛刷清理表面灰塵，發現涂層有剝落、鼓包，及時修補；若出現輕微銹斑，用細砂紙打磨掉，再補涂防銹劑。

　　Environmental control and daily maintenance are equally important for rust prevention. When making models, it is necessary to maintain a dry working environment with humidity controlled between 40% -60%, which can be adjusted with the help of a dehumidifier or humidifier. During the processing, if the surface of metal parts is stained with sweat or oil, it should be wiped clean with a dry soft cloth in a timely manner, as the salt in these substances may accelerate corrosion. When storing the model, it is necessary to choose a well ventilated and acid free place, place some desiccants around it, and replace them regularly. The internal enclosed space of large models, such as the wing cavity, can be suspended with rust proof bags, and the special gases released can form an invisible protective layer. Normally, it is necessary to check every 3-6 months and use a soft bristled brush to clean the surface dust. If any peeling or bulging of the coating is found, it should be repaired in a timely manner; If there are slight rust spots, use fine sandpaper to polish them off, and then apply rust inhibitor again.

　　總之，預防大型航空模型金屬部件生銹，關鍵在于從材料、涂層、環境到維護的每一個細節都做到位。根據模型的使用環境和金屬類型采取針對性措施，才能讓金屬部件長期保持良好狀態，讓航空模型始終展現出完美的姿態和性能。

　　In short, the key to preventing rusting of large aviation model metal components lies in ensuring that every detail from materials, coatings, environment to maintenance is done in place. Targeted measures should be taken based on the usage environment and metal type of the model in order to maintain the metal components in good condition for a long time and ensure that the aviation model always exhibits perfect posture and performance.

　　本文由大型機器人模型制作友情奉獻.更多有關的知識請點擊:http://m.it090.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from a large aircraft model For more information, please click: http://m.it090.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message